Aluminium telescope towers

The aluminium telescope towers has been completely renewed.

  • The aluminium telescope tower is developed to the current NEN6702 en DIN-norms.
  • The maximum wind load has been increased to 2m² for a freestanding tower!
  • The XL-types are designed for a windload over 3m².
  • The sections of the telescope tower are extracted simultaneously. The advantage of this is that the tower can be extracted to an acceptable height even with high wind speeds.
  • The guide rolls are easily adjustable.
  • The fall protection security can be easily operated by means of a lever at the bottom of the tower.
  • A rotor platform is supplied as standard.
  • A top-bearing platform is supplied as standard.
  • The sections have standard lengths of 6, 7 or 8 metres.
  • Other lengths can be manufactured as well.
  • The mast consists of a maximum of 4 sections. This means for a 4 x 8 metre telescope tower a maximum tower height of 28.25 metres excluding the top tube.

 

WM2/6 Aluminium telescope tower
WM2/6 Aluminium telescope tower
WM2/7 Aluminium telescope tower
WM3/6 Aluminium telescope tower
WM3/6 Aluminium telescope tower
WM3/7XL Aluminium telescope tower
WM3/7XL Aluminium telescope tower
WM3/8 Aluminium telescope tower with coating
WM4/8 Aluminium telescope tower
WM4/8 Aluminium telescope tower
WM4/8 Aluminium telescope tower
MWM3/6 Mobile aluminium telescope tower
MWM3/6 Mobile aluminium telescope tower
SKF top bearing for high windload
Ultrabeam rotator for big antenna systems


The aluminium telescope tower is available in 5 types:

  • Permanent tower on a concrete base.
  • Tiltable tower on a concrete base.
  • Tower mounted to a wall.
  • Tiltable tower mounted to a wall.
  • Mobile trailer tower.

The aluminium telescopic towers are available with the following:

  • Galvanized manual winch
  • Stainless steel manual winch
  • 230V or 400V electrical winch
  • 12V or 24V electrical winch